●EASY INSTALL:Flexible Car LED Light Strip can be installed without open the car headlight assembly. Lumen:1300,Pure high brightness,highlight seamless,import lights core,quality assurance, heat dissipation quickly,lasting lighting, As running light, it will be white when the car is running; as turn signal light, it will be sequential flowing yellow(amber) sequential when the car is turning. 🧡Notes: Use glue to stick the joints for better waterproofing.
●ACCENT DRL AND TURN SIGNAL: A striking white liner look with turn signal actiavated amber lights. Flexibility is very good,soft and easy to make any shapes and length to fit into your headlight retrofit;Very strong plasticity,silicone is a kind of highly active adsorption material,the Flexible DRL Tube Strips no matter how twisted recovery is very good,non-flammable fire retardant burn.
●BENDS TO YOUR WILL: Can be bent, twisted, and contoured to fit most headlights. The Flexible Car LED Light Strip can paste outside of the headlights directly without disassembling the headlight,super easy to install,just require right connect to the positive (+) and negative (-) side, It can be cut to any size and re-capped,after cutting, the tail must be insulated, otherwise it will be short-circuited.
●Simply splice into your current DRL and turn signal wiring. Important Notice: Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owner’s manual or original bulb size to confirm before placing an order.
●Cuttable every 3LED Beads (must seal the tube with Insulated Glue for Waterproof Protection). The Flexible DRL Tube Strips can be used for car headlight, daytime running light, turn signal light, angel eye light, and so on. Brighter and clearer than the original halogen lamps of your car. Compatible for most of vehicles like cars SUV vans trucks boats with DC 12V power.
- It can be installed without open the car headlight assembly.
- Can be bent, twisted, and contoured to fit most headlights
- Simply splice into your current DRL and turn signal wiring Suitable for all vehicle models.
- When you start the car engine, LED daytime running light will automatically turn on. When you turn off the car engine, LED daytime running light will delay off 12 seconds.
Only had it for short time so can't comment on long term use. I think it looks great not too hard to install . Adhesion seems pretty good so far and very easy to cut.
I installed these on a 2005 Buick Century that has Day Time Running lights.This means the front blinkers are tied into the DRL module.During the day both sequencer flashers flash at the same time constantly as the hazard lights are on..THE FIX i found.I ran the DRL positive "Red" to my ignition fuse adding a 5 amp fuse and the negative "Black" to my battery's negative pole so the DRL strips are on when my engine is running.The sequencer flashers i tied the "Yellow" wire to each side of the the side courtesy lights that come on when the flasher is turned on because it is constant power....I also installed the on my son's car that doesn't have DRL module tieing the flashers straight into the blinker bulbs harness and I ran the DRL positive strips "Red" to my ignition fuse adding a 5 amp fuse and the negative "Black" to my battery's negative pole so the DRL strips are on when my engine is running.
Great value for the money works great
Looks good easy to install